Grommets  

The Grommet option can easily be added to an image. By default the top and bottom, as well as left and right values are locked together. To set the values independently, unlock them by clicking the link icon (Figure 1). ). Also you can select a method ([Spacing] or [Quantity]) for putting grommets on the each place.

 

Spacing – This allows you to specify an approximate distance between grommet marks on a side of the image. The first and last mark locations will be determined by the offsets one either side, then marks will be added between them as needed, using the distance specified as a guide.

 

Quantity - This allows you to specify the number of grommet marks to place on a side of the image. The first and last mark locations will be determined by the offsets, then marks will be added at evenly-spaced intervals between them.

 

This option allows you to set a size for grommet marks. Mark Size measurement will be the diameter of the circle or the length of the cross-hairs, depending on the style selected.

 

There are four grommet mark styles: a circle, a filled-in circle, cross-hairs, or a circle with cross-hairs. To make changes to the line type, width, or color, use the settings button to open the Line Style dialog.

 

  1. To add grommet marks, check a mark to Top. Bottom, Left and Right, or any combination of designed settings.
  2. Set a grommet size that you want.
  3. Select grommet mark style from 4 styles and click button for setting mark line style. This will open “Setup Mark Line Style” dialog. You can specify the space between grommet marks in the [Gap Length] of this dialog.
  4. Enter custom value that you want to make space from cutting line of an image.

 

TIP: To learn more about Bleed, see a white paper and ONYX Video.

Figure 1