♦ Modify and manage advanced ICC build settings.

This option is in the ICC ProfileAn international standard for describing color transformations. Also known as ICM (.icm). See also Color Profile and Profile Library. step (Figure 1). Click icon. You will see Preset Selection and [Edit…]buttons (Figure 1).

Preset Selection - The drop-down menu contains preset ICC build options. By default MediaA paper or other substrate that the printer creates images on. Manager will auto select an appropriate preset based on the Ink Configuration used in the print mode (Figure 2).

• Ink with Light Black
• Ink with Light Cyan and Magenta
• No Light Inks

• SaturationTerm used to describe the strength, purity, or vividness of a hue. Saturation indicates how much color is present. When there is no saturation, there is no color; the more saturation, the more color there is of the given hue. Extreme

• Stable Grayscale1. The range of tones from black to white. 2. An image consisting of only levels of black and white.

• Textile

• Custom

Edit - Clicking this button opens the"ICC Build Options" dialog (Figure 3). Clicking the down arrow opens the “ICC Options Manager” dialog where custom presets can be created. Click [New] to name and configure a custom ICC Build preset (Figure 4).

Build Options dialog:

Achromatic Black GenerationAddition of Black (K) ink to Process Colors when converting from RGB to CMYK. Usually handled through UCR or GCR methodologies (GCR Type: GCR): The [Black Generation], [Start Black], and [Maximum Black] selections control when, how quickly, and to what extent Black ink is used for colors without hue. In other words, these controls affect colors along the general [L*] axis of the profile gamut. An increasing amount of CMY ink will be automatically determined by the profile build engine to achieve the grayscale objectives (from light to dark).

Achromatic Black Generation (GCR Type: GCR Plus): [GCR Plus] is a “smart” black generation option that ensures LightnessPerception by which white objects are distinguished from gray objects and light- from dark-colored objects. values of achromatic grays will decrease smoothly across the range from light to dark. Additionally, ink savings can be achieved by lowering the [End CMY] setting, generally resulting in decreasing CMY ink usage above the entered value. Note that if the desired [End CMY] setting results in a Lightness reversal, [GCR Plus] will try to get as close as possible to the setting while maintaining a uniform decrease in Lightness. The [Black Generation], [Start Black], and [Maximum Black] selections act the same as with the GCR setting.

Achromatic Black Generation (GCR Type: UCR): The [CMY Gray Generation], [Start CMY Gray], and [Maximum CMY Gray] selections control when, how quickly, and to what extent the CMY inks (making up gray) are used to define colors without hue. These controls affect colors along the general [L* ] axis of the profile gamut. An increasing amount of black ink will automatically be determined by the profile build engine to achieve the grayscale objectives (from light to dark).

GCR and UCR

GCR (Gray Component Replacement): In any two-color combination using C, M, or Y, a two-color combination constitutes a desired color (ChromaA three dimensional graph called Color Space. We can assign an absolute value to any color using three independent variables: Lightness, Chroma, and Hue.). While the third remaining color channel constitutes the Gray Component of the desired two-color combination, and is used to make the color darker. We refer to this third color as the Gray Component.

UCR (Under ColorThe attribute of visual experience that can be described using the dimensions of Hue, Saturation, and Brightness. Removal): Works a bit differently. UCR defines how much CMY Gray Component to remove when generating black.

From a conventional standpoint UCR and GCR are often used in conjunction with one another. You define how much black to use with GCR and how much CMY to remove with UCR.

Summary: When using the [GCR] option you are indicating that you want to selectively control the black ink portion. When using the [UCR] option you are indicating that you want to selectively control the Grayscale CMY portion.

NOTE: It is a reasonable assumption that there is a linear increase in the uncontrolled portion of the Grayscale.

Chromatic Black Generation: The [Start Black], [Maximum Black], and [Black Generation] selections control when, how quickly, and to what extent black ink is used for determining dark ink colors at an extreme distances from the [L*] axis. In other words, these controls affect how black ink is used in colorful shadow areas of the gamut.

NOTE: The CGR Type selection is not used for chromatic black generation.

TIP: Achromatic and Chromatic Theory

Achromatic: Colors without hue. White, Gray, and Black. Colors along the [L*] axis of the gamut (LuminanceThe lightness or Brightness of an image.).

Chromatic: Defined as colors with Hue1. A tint or color specified by an angle on the HSV Color Wheel. Going counter-clockwise around the wheel, hues shift from red to yellow to green to cyan to blue to magenta and finally back to red. 2. The attribute of a color that permits it to be identified as a specific color. Hue combined with Saturation and Value fully defines a color., or colors along the [a*] and [b*] axis of the gamut (Chroma and Hue)A three dimensional graph called Color Space. We can assign an absolute value to any color using three independent variables: Lightness, Chroma, and Hue..

 

Any color can be thought of being totally achromatic (having no hue), totally chromatic (a completely saturated color), or a mixture of these two extremes. The Black Generation settings allow for the black generation to be defined for colors at the extremes with a mixing of the black generations being performed when the color is a mixture of the extremes.

 

To learn more about using Achromatic UCR go to the Thrive article and click the Maxi-imize tab.

Gamut MappingThe plotting of an image color gamut into the CIE color space. - This option determines how out-of-gamut colors are mapped to in-gamut colors. The selected gamut mapping methods only apply when a job is using either the Perceptual or Relative ColorimetricOne of the two colorimetric rendering intents that try to preserve colorimerty of colors that are mapped to an exact match whenever possible, and where not possible (becasue the color is out of gamut), the color is mapped to the nearest equivalent. rendering intents.

Perceptual Method – This option gives your output more pleasing, but less accurate color. It adjusts all the colors in the gamut to keep the relationships between in-gamut color and mapped out-of gamut colors the same. There are 4 methods you can select:

• Classic will attempt to preserve both Lightness (L*) and Chroma (C*) equally.
• More Lightness Preserving will map the color as close as possible while while preserving Lightness (L*). [More Lightness Preserving] is generally used for low-gamut media. This is the default setting since version 18.
• Enhanced Color will map the color as close as possible while preserving Chroma (C*). [Enhanced Color] is recommended when more saturation/colorfulness is desired.

• Vivid Color maps out-of-gamut colors lighter and more colorful compared to the other gamut mapping options. It is best suited to vector data. With image data, loss of contrast and detail may result.

Relative Method – This option is especially useful for getting more vibrant spot color reproduction with out-of-gamut colors. In-gamut colors are not adjusted. The selected method will also apply to any type of image data that is processed using the Relative Colorimetric intent. There are 2 methods you can select:

• Default Lightness Preserving: This feature uses the same relative gamut mapping method as in previous versions. In-gamut colors are not affected
• Chroma Preserving: This feature is similar to the Vivid selection with Perceptual Gamut Mapping. In-gamut colors are not affected. It is useful to achieve more satisfying out of gamut colors for some applications such as spot color replacement.

Note:

For the [Relative Method] to apply to spot/named colors, the SPOTRENDERINTENT APPE rip option must be enabled and set to 2 (Relative Intent), and the Spot ColorA specific color or type applied to individual graphic items. Replacement Table must be enabled

Generally, [Chroma Preserving] results in more colorful reproduction, but darker colors compared to the [Default Lightness Preserving] method.

Chroma Boost TM - This set of options allows you to set [Mapping Range] and [Hue stabilization].

• Mapping Range: This allows you to adjust the mapping out of gamut colors and is useful for low gamut media and direct to textile profiles. When this option is enabled, you can select a value to apply to Mapping Range from [0.00] to [1.00]. The default is set at [0.20] and this value represents the area to search when looking for a closer Chroma value. This area is relative to where the color originally is mapped when [Mapping Range] is off. Higher values can cause non-linearities in gamut mapping.
• Hue stabilization: This option attempts to keep hue mapping of Red, Green, and Blue colors from shifting, especially when mapping extremely out of gamut colors, like those in RGBSystem for describing colors based on a combination of values for Red, Green, and Blue—the additive primaries. RGB is the basic additive color model used for color video display. Mixing various percentages of red, green, and blue light can recreate most of the spectrum; combining 100% of all three creates white light. See CMYK, Additive Color. images. This setting is enabled by default.

Saturation Factor - This option increases the saturation of the calculated ICC values, with chroma increase weighted more than lightness change. The default setting is[ More] for most of the ICC build option presets.

NOTE: For the most impactful increase of saturation, it is recommended to also use one of the saturation input profiles.

Other Options

You can set other legacy and rarely-changed options by clicking the icon in this dialog.

 

Viewing Light Source – This option is only available if you use spectral data device to read swatches. It allows you to build an ICC profile for target lighting other than D50. (* Default setting is [D50])

 

ICC Profile Version - This option contains ICC Profile standards that can be used. It is generally better to leave the default selection of [Version 4.x].

 

Use Large Input Profile1. A profile that describes the color characteristics of a device such as a scanner that is used to create images. 2. A profile that identifies the output device being simulated for ICC Color Matching (that is, modifying the output image so that a print on one device appears as if it were printed on a different device). Size] - Enabling this option makes your ICC profile suitable for proofing.

 

Balance CMY Gray - This option uses a legacy method to balance CMY gray values. For best results, this option should be left disabled.

 

Improve Profile1. A method of defining and compensating for the color shifts in an image as it is shown on a monitor and printed on a media. 2. A specific Printer/Ink/Media combination in RIP-Queue. InterpolationProcess of increasing the apparent resolution of a raster image by using either a bi-cubic or sequential algorithm to create new dots in between the existing dots.- Enabling this option can improve gamut boundary mapping by interpolating data points. However, using this option can cause non-linearities in gamut mapping. It is recommended to use Mapping Range with a value of 0.00, as this will do a better job of finding the gamut boundary. Note that Mapping Range and Improve Profile Interpolation are exclusive to each other, and cannot be enabled at the same time.

 

Dynamically Generate Ink Separations - This option is only available when using spot channels. It allows for maximum Chroma when using HiFi inks. Disabling this option leaves ink separations static.

 

Table Size - This option impact the accuracy and size of the ICC Profile. A larger table size (41 grid points) is more accurate but slightly slower than the Standard table size (33 grid points). [41 grid points] is the default setting.

 

Total Ink Limit - The [Total Ink Limit] sets the maximum percentage of total ink allowed for the profile. 300% means that C, M, Y, and K channels may not all be used together in full capacity (each channel at 100% equals 300%). If you must limit the total ink, you should try adding an Ink Limit calibration before reducing the Total Ink Limit of the ICC Profile itself. The default setting for an ICC Profile is the maximum ink percentage for all of the process channels in the mode.

BUILD ICC　Profile (Figure 5)

Click [Build ICC Profile] button after you have read in your swatch and set your desired options.

TIP: To learn about Rebuilding ICC Profiles click here.