VideoNet is a proprietary network protocol that must be added to Windows before you can configure a VideoNet printer. When adding a network protocol, Windows will allow you to browse to a disk that contains the protocol information. The files you need can be found on the RIP-QueueAn organized list of jobs that are printed on a first-in first-out (FIFO) basis. Program disk in the Extras > VideoNet folder. VideoNet should be bound to only one network card; all other protocols should be bound to a separate network card.

NOTE: Contact your system administrator for assistance in adding this protocol.

To configure a VideoNet printer:

1. Choose VideoNet from the Configure Printer Port dialog. See Printer Ports - Configure a Printer Port for information on accessing the Configure Printer Port dialog.
2. Click the Configure button. This opens the Select VideoNet Printer Connection dialog.
3. Select your printer from the list.
4. Click OK.

If your printer does not show up in the Select VideoNet Printer Connection dialog, verify the network connection from the computer to the printer, as well as the bindings of the VideoNet protocol. The printer itself also must be turned on and on-line.

NOTE: The VideoNet protocol is not supported in Windows 9x or ME.

Related Topics